Alula RE124 Honeywell to GE/Qolsys Wireless Translator Security Alarm

Description

Honeywell to GE/Qolsys Wireless Translator
Operation
• Existing Honeywell protocol sensors transmit as usual. Translator passes information on to control panel as if they were GE transmitters.
• Honeywell fob: Lower left = Lights, lower right = panic (= GE double button press), although can be non-alarm in panel.
• Translator Module Zone wireless transmission (unique ID): Tamper, when cover opened. Also sends restore. Low battery, when low battery. Also sends restore. Supervisory every hour. Supervisory stopped if 12V DC power absent. Translator Module does not send any alarm signals about itself.
Specifications
GE Device Type: 10 (Translator device ID).
Receiver and Transmitter: Listens to SAW and crystal transmitters. Talks to SAW and crystal receivers.
Backup batteries: Three AAA Alkaline.
External supply: 8.5 to 13 VDC or 6-9 VAC
Standard: Resolution RE012: 12VDC, 50mA.
Supply: 4mA, normal operation
Optional: GE 60-898-ITI, for securing screw Wire connection polarity DOESN’T matte
r! Current draw with . Power Fail Conditions: 12V DC gone. Translator device ID supervisories (including low battery reports) are stopped during 12V DC loss. Back-up Battery Life on 12V DC Fail: 72 hours (cumulative). Device Low Battery: When approximately 48 hours remain in back-up. Housing dimensions: 4x6x1 inches Specifications subject to change without notice.
Features
• Listens to Honeywell protocol wireless devices.
• Transmits GE protocol wireless.
• Enrolls up to 63 devices.
• Unique wireless ID (or loop) for each zone, plus 1 for main device.
• All sensor alarm, supervisory and trouble signals are passed through.
• Dual antennas for both Receive and Transmit diversity for reliable range.
• Back-up battery operation.
• Complete supervision of tampers, external power fault and low battery.
If you have any questions please email BEFORE you buy
Alarm Dealers Welcome