Sartorius Mark-3 LTE Series Additional Heater Module: Fully Reconditioned by LIS

Description

Sartorius Mark-3 LTE Series Additional Heater Module: Fully reconditioned by LIS
Specifications
:
• Display of Results 0.001%
• Balance Resolution 0.0001 grams
• Balance capacity 40 grams
• Balance repeatability +/-0.5mg +/-0.1mg
• Method of Measurement: Loss on Drying
• Modular configuration: Control and Heater modules (Optional: up to 4 Heating modules)
• Heat Source: Four parallel infrared quartz cylinders
• Temperature Setting/Control: 30-210°C in one degree increments/RTD sensor, +/- 1°C
• Temperature Steps: Programmable one or two with selectable ramp rate
• Temperature Adjustment: Optional fixture for Internal electronic two point adjustment
• Standby Temperature: 30-160°C in one degree increments with selectable equilibration time
• Temperature display: Display of both target and current temp at each stage of drying and standby
• Conserve Mode Clock: Programmable time by day of week to shut down and wake up analyzer
• Balance Calibration: Internal calibration weight or external manual
• Ideal Weight: Audio and visual display for programmable target sample weight addition
• Target limit alert: Minimum and maximum programmable limits and screen alert when test done
• Program Storage: 300 programs with unique settings, alphanumeric naming
• Result Storage: 999 results with statistics: Average, SD, RSD, high and low
• Units of Measure of Results: Weight, %Moisture, %Solids, %Volatiles, Fuel Moisture, PPM
• Endpoint Determination: Actual slope, Calculation and Time modes
• Sample ID: Numeric, Numeric incrementing, alphanumeric or turned Off
• Modes of Operation: Standard test, Syringe or Concentration modes
• Operator Names: Twenty alphanumeric operator names
• Security Mode: Selectable setup and operation protection with passcode
• Graph Mode: Graph of Temperature/time and Percent/time
• Display: Quarter VGA with contrast adjustment (black on white or white on black)
• Keypad: Sealed membrane with audible tactile feedback
• External Input/Output: Serial, USB and Ethernet
• Internal printer
• Internal Clock: Date and Time: U.S. or International, Military or AM/PM
• Audible Tone: Key stoke, ideal weight met and end of test, selectable On or Off
• System Status Indicator Lights: Two tri-color LEDs (balance & heater) on front of Heater module
For more information and details on warranties, services, or supplies contact us
Our offices are located in Southern California (Pacific Time Zone).
Laboratory Instrument Specialists, Inc. (Sales/Service/Supplies)